C.link broadband access terminal equipment printed circuit board copy

c.link broadband access CPE is a common electronic communications equipment, widely used in industrial, communications, defense and other fields. Tang science and technology as a powerful reverse technology research firm, has long been engaged in a kind of PCB copy board, prototyping, prototype debugging and field of work in other fields as communications equipment successfully completed numerous projects, won the praise of customers. Link broadband access CPE is a success story of the Tang science and technology in the field of communications equipment.

For users to access complete data signal modulation and demodulation, data packet forwarding, the data signal and the CATV signal mixing and transmission, with the EN100, dual-channel central office equipment to achieve 100Mbps high speed data access with the local switch function, port-based VLAN classification.

c.link broadband access CPE performance parameters:
Operating frequency of 850MHz ~ 1500MHz typical launch power of +2 dBm
Modulation mode OFDM (BPSK, QPSK, 16-256QAM) maximum transmit power of +8 dBm
Channel bandwidth of 50MHz delay of 3.5 ms
The number of subcarriers 256 physical layer rate of 270Mbps
Sub-carriers the bandwidth 195.3125KHz MAC layer rate of 130Mbps
Multiple access, the TDMA VLAN support group
TDD physical port duplex mode (dual LAN ports, E1000)
Dynamic range of 0 ~ 75dBm IGMP Snooping is
Up and down the maximum attenuation 79dB/79dB QoS TOS, DiffServ, DSCP, 802.1p
Interface characteristics
Filter access way built-in
RF interface two; a CATV signal interface, a mixed-export of the MoCA and CATV signals
RF interface type connector: F-type female, English / Metric selectable; Impedance: 75 ohms
Single Ethernet port Ethernet interface: Used for user data access
Can be used for user data access and dual-mode set-top box access dual-network ports:
The type of Ethernet interface 10/100Base-T/Tx, RJ45,
Environmental characteristics
Operating Temperature 0 ~ 60 ℃
Storage Temperature -10 ~ 70 ℃
Ambient humidity 10% ~ 95% non-condensing
Electrical Characteristics
Power DC5V/1A
Consumes less than 5W
Physical properties
Size 168 × 125 × 26mm (length × width × height)
Weight 0.3Kg

    Tang Technology can be the client of the c.link broadband access equipment series product areas to provide customers with a full range of services we can provide not only the cloning of this series of product imitation and secondary development, you can also provide many design reference system-level solutions and prototype debug, mass production and other vertical services to best meet customers' needs. We sincerely welcome every needs of customers can contact us.