Anodic polarization instrument case About copy of the board and a full set of cloning technology

The anodic polarization analyzer series referred to the potentiostat / galvanostat is an important corrosion testing and electrochemical measuring instruments in the kinetics of electrode process, power analysis, electrolysis, electroplating, metal, metal corrosion rate measurements and a variety ofcorrosion and anti-corrosion and electrochemical protection parameters test has a wide range of uses. Can use, can also be supplemented by the signal generator, DC oscilloscope, XY recorder, digital conversion for a variety of dynamic and static, transient and steady-state test measurement, suitable for factories and enterprises, scientific research, teaching test the use and development of new products and a variety of measurements.
Technical parameters:
Constant potential control range of-1999mV ~ +1999 mV (continuously adjustable)-4999mV ~ +4999 mV (continuously adjustable)
Potential control precision ≤ 1mV ≤ 1mV
Output current measurement range of 0 ± 1.999mA 0 ± 19.99mA the ± 199.9mA 0 ~ ± 1.5A 0 ~ ± 1.999mA 0 ± 19.99mA 0 ± 199.9mA 0 ~ ± 1.5A
Output of the tank pressure is ± 10V ± 15V
The constant current control range of 0 ~ ± 1.999m 0 ~ ± 19.99mA 0 ~ ± 199.9mA 0 ~ ± 1.5A (continuously adjustable) 0 ~ ± 1.999mA 0 ~ ± 19.99mA 0 ± 199.9mA 0 ~ ± 1.5A (continuously adjustable)
Output potential measurement range-1999mV ~ +1999 mV-4999mV ~ +4999 mV
Potential measurement error ≤ 1%, subtraction bottom of a word less than 1%, plus or minus bottom of a word
Current measurement error ≤ 1%, subtraction bottom of a word less than 1%, plus or minus bottom of a word
Output of the tank pressure is ± 10V ± 15V
Input impedance ≥ ≥ 109Ω, 109Ω,
Response speed ≤ 5ms ≤ 5ms
Tang has been to reverse the technology to master the details of the product, but also the secondary development of this product. We also provide you with the PCB copy board, PCB system board, chip decryption, IC decryption, PCB development and design, electronic product development, electronic product design, schematic diagram of the system to do, the BOM list making, electronic product development, design, circuit board copy board and other services.